本帖最后由 warmonkey 于 2014-6-15 13:49 编辑
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
![novena_depop_clean_labels_sm.jpg]()
自制的imx6笔记本电脑
Freescale iMX6 CPU — same footprint can support dual-lite and quad versions:
Quad-core Cortex A9 CPU with NEON FPU @ 1.2 GHz
Vivante GC2000 OpenGL ES2.0 GPU, 200Mtri/s, 1Gpix/s (*)
Boot from microSD firmware
64-bit, DDR3-1066 SO-DIMM, upgradable to 4GB
SATA-II (3Gbps)
mini PCI-express slot (for blob-free wifi, bluetooth, mobile data, etc.)
UIM slot for mPCIe mobile data cards
Dual-channel LVDS LCD connector (up to QXGA (2048×1536) @ 60Hz resolution) with USB2.0 side-channel for a display-side camera
Resistive touchscreen controller (note: captouch displays typically come with a controller)
1.1W, 8-ohm internal speaker connectors
2x USB2.0 internal connectors for keyboard and mouse/trackpad
Digital microphone
3-axis accelerometer
header for optional AW-NU137 wifi module (*)
HDMI
SD card reader
headphone + mic port (compatible with most mobile phone headsets, supports sensing in-line cable buttons)
2x USB 2.0 ports, supporting high-current (1.5A) device charging
1Gbit ethernet
100 Mbit ethernet — dual Ethernet capability allows laptop to be used as an in-line packet filter or router
USB OTG — enables laptop to spoof/fuzz ethernet, serial, etc. over USB via gadget interface to other USB hosts
Utility serial EEPROM — for storing crash logs and other bits of handy data
Spartan-6 CSG324-packaged FPGA — has several interfaces to the CPU, including a 2Gbit/s (peak) RAM-like bus — for your bitcoin mining needs. Or whatever else you might want to toss in an FPGA.
8x FPGA-driven 12-bit, 200ksps analog inputs
8x FPGA-driven digital I/O
8x FPGA-driven PWM headers, compatible with hobby ESC and PWM pinouts — enables direct interfacing with various RC motor/servo configurations & quad-copter controllers
Raspberry-Pi compatible expansion header
13x CPU-driven supplemental digital I/Os
3x internal UART ports
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
自制的imx6笔记本电脑
Freescale iMX6 CPU — same footprint can support dual-lite and quad versions:
Quad-core Cortex A9 CPU with NEON FPU @ 1.2 GHz
Vivante GC2000 OpenGL ES2.0 GPU, 200Mtri/s, 1Gpix/s (*)
Boot from microSD firmware
64-bit, DDR3-1066 SO-DIMM, upgradable to 4GB
SATA-II (3Gbps)
mini PCI-express slot (for blob-free wifi, bluetooth, mobile data, etc.)
UIM slot for mPCIe mobile data cards
Dual-channel LVDS LCD connector (up to QXGA (2048×1536) @ 60Hz resolution) with USB2.0 side-channel for a display-side camera
Resistive touchscreen controller (note: captouch displays typically come with a controller)
1.1W, 8-ohm internal speaker connectors
2x USB2.0 internal connectors for keyboard and mouse/trackpad
Digital microphone
3-axis accelerometer
header for optional AW-NU137 wifi module (*)
HDMI
SD card reader
headphone + mic port (compatible with most mobile phone headsets, supports sensing in-line cable buttons)
2x USB 2.0 ports, supporting high-current (1.5A) device charging
1Gbit ethernet
100 Mbit ethernet — dual Ethernet capability allows laptop to be used as an in-line packet filter or router
USB OTG — enables laptop to spoof/fuzz ethernet, serial, etc. over USB via gadget interface to other USB hosts
Utility serial EEPROM — for storing crash logs and other bits of handy data
Spartan-6 CSG324-packaged FPGA — has several interfaces to the CPU, including a 2Gbit/s (peak) RAM-like bus — for your bitcoin mining needs. Or whatever else you might want to toss in an FPGA.
8x FPGA-driven 12-bit, 200ksps analog inputs
8x FPGA-driven digital I/O
8x FPGA-driven PWM headers, compatible with hobby ESC and PWM pinouts — enables direct interfacing with various RC motor/servo configurations & quad-copter controllers
Raspberry-Pi compatible expansion header
13x CPU-driven supplemental digital I/Os
3x internal UART ports