are you say what，do you 再say一遍 hao ma，I look不懂 么么哒
引用
评论
Could you help me modify it？
Please tell me what you need?
Please give the circuit diagram.
Thank you.
Please give the circuit diagram.
Thank you.
引用
评论
引用
评论
那一抹淡蓝 发表于 2014-3-23 11:05
难道lz真是老外
Funny! Program Inside is Chinese, forums are Chinese, if he can read Chinese. Why not use Chinese typing?
引用
评论
小龙鱼 发表于 2014-3-23 11:14
Funny! Program Inside is Chinese, forums are Chinese, if he can read Chinese. Why not use Chinese ...
记得93、bh，王者归来、celeron533那些大婶们都用过英文写贴 曲高和寡呀
引用
评论
本帖最后由 石峻峰 于 2014-3-23 12:36 编辑
Sorry,I couldn't help you for this question
maybe we all cannot
Because too many people Don't know what you are talking about
You can use Google Translate or Nǐ mā bī zhuāng Shěn me lǎo wài ! yòng zhōng wén yào sǐ a !
Sorry,I couldn't help you for this question
maybe we all cannot
Because too many people Don't know what you are talking about
You can use Google Translate or Nǐ mā bī zhuāng Shěn me lǎo wài ! yòng zhōng wén yào sǐ a !
引用
评论
引用
评论
本帖最后由 celeron533 于 2014-3-23 16:03 编辑
编译不通过，没有setup() 和 loop()
core.a(main.cpp.o): In function `main':
C:\Users\celeron533\Desktop\arduino-1.0.5-r2\hardware\arduino\cores\arduino/main.cpp:11: undefined reference to `setup'
C:\Users\celeron533\Desktop\arduino-1.0.5-r2\hardware\arduino\cores\arduino/main.cpp:14: undefined reference to `loop'
该在的东西都在，代码也检查了，似乎没有非法字符，CR LF 换行符也没什么问题
除了MPU6050.ino用的是UTF8编码而非是ANSI（似乎使用gcc编译的时候没有很大的问题）
编译不通过，没有setup() 和 loop()
core.a(main.cpp.o): In function `main':
C:\Users\celeron533\Desktop\arduino-1.0.5-r2\hardware\arduino\cores\arduino/main.cpp:11: undefined reference to `setup'
C:\Users\celeron533\Desktop\arduino-1.0.5-r2\hardware\arduino\cores\arduino/main.cpp:14: undefined reference to `loop'
该在的东西都在，代码也检查了，似乎没有非法字符，CR LF 换行符也没什么问题
除了MPU6050.ino用的是UTF8编码而非是ANSI（似乎使用gcc编译的时候没有很大的问题）
引用
评论
IKR,is that to hard for you to just use some Chinese? Or you are having some issues with writing words using Chinese?? If you are, let me know, i'll help u, i will try my best, just, you don't really want to mass with those people (including meee,jK)
引用
评论
celeron533 发表于 2014-3-23 14:01
编译不通过，没有setup() 和 loop()
那两个是arduino内部的，其实就是setup一下然后while(1)loop();
那个Arduino IDE可能字符集支持有限吧，其实照着抄一遍应该也就能搞定了，还能熟悉一下代码
引用
评论
ltl 发表于 2014-3-26 00:08
那两个是arduino内部的，其实就是setup一下然后while(1)loop();
那个Arduino IDE可能字符集支持有限吧， ...
那时候我试过了，把其他函数都删掉只留下setup()和loop()照样报错
引用
评论