或 与
{{ forum.displayName }}
{{ forum.displayName }}
全部文章   只看精选
至
匹配程度   发表时间
降序   升序
收起
高级搜索
约找到 771 条结果,耗时 0.254 秒
【图纸开放下载】LRE5000液体火箭发动机参考设计
warmonkey
11年8个月前
发表于喷气推进
猎鹰坛友的Rocket Designer包含了特征长度数据. 因为我们打算采用互击式喷注器(详细介绍见下文),燃料和氧化剂在撞击的时候有一次混合,并且因为是小发动机,特征长度可以取到比较小。
zx-106944
1年0个月前
电文查看详情
每日宇航员采访火箭实验室(Rocket Lab)CEO(那个吃帽子的人)那期节目说过为什么不用气尖,可以参考一下
矢量固体火箭发射
zx-91293
5年6个月前
发表于喷气推进
矢量固体火箭发射Launch of a model rocket.
自制一枚固体火箭发动机
吴裕泉
2年4个月前
专栏文章
固体火箭发动机solid-propellant rocket engine
【起草】《中国业余探空火箭安全规定》 讨论帖
bh,王者归来
14年1个月前
回复于喷气推进
I will use only certified, commercially made rocket motors, and will not tamper with these motors or
Arduino&水火箭开伞航电的制作
暮羽要摸鱼
3年3个月前
发表于航空技术
水火箭开伞+高度记录Water rocket parachute opening + altitude record
关于小型可回收二级火箭的设计与制作
zsjzsj
3年3个月前
发表于喷气推进科创基金
以单级模型火箭为基础设计二级探空火箭Using 3D modeling, programming, and other techniques to design a two-stage sounding rocket
专项活动募捐——科创航天局页面
科创网
14年0个月前
发表于科创基金
is to enable space travelling for amateur, while catching up the world leading nations in amateur rocket
世界首个采用电力驱动燃料泵的运载火箭“电子号”首次商业发射成功
太空来电
8年1个月前
发表于喷气推进
运载火箭:电子火箭电子火箭( Electron Rocket),以液氧、煤油为燃料。之所以取名电子火箭,主要是因为火箭发动机的涡轮泵,没采用传统燃气驱动,而是电动机驱动。
自制TVC固体火箭空中姿态调节方案
不毒奶
3年5个月前
发表于喷气推进
By adjusting the direction of the nozzle, the thrust direction of the TVC solid rocket changes, so as
KNSU水管机火箭发射
星航天
4年7个月前
发表于喷气推进
Some of my plans for rocket making and the future.
简单的火箭全箭体制作办法
燧人氏
1年3个月前
发表于喷气推进
A simple method for making the entire rocket body.
[科创基金露行动] Zeta-X酚醛-金属KNSB发动机制作
Syscus-AC
6年7个月前
发表于喷气推进
实验编号:Rocket-Outdoor-001实验日期:2020-4-6实验目的:测试Zeta-X酚醛-金属KNSB发动机实验结果:成功I.尺寸数据整机长度(mm)壳体外径(mm)燃料内径(mm)燃料总长度
一枚小型固体燃料火箭的设计/制作/发射
小叮当0312
3年3个月前
发表于喷气推进
这是用open rocket画出的设计图,箭体内的四个舱室从左到右分别装的是:降落伞;隔热层和开伞药;开伞控制系统;发动机。2:发动机的制作。
[ASR] Calculation of the combustion of APER (updated)
bh,王者归来
13年7个月前
发表于喷气推进
report was written in English for advanced readers who were expected to be skillful and knowledgeable rocket
一种微型火箭的一些准备以及想法
ouybg
3年4个月前
发表于喷气推进
一种微型火箭的一些准备以及想法A style of cheap rocket and some ready for it
AP基小型可回收火箭
zsjzsj
2年3个月前
发表于喷气推进科创基金
The design and manufacture of a recyclable model rocket using AP-based fuel aims to introduce a low-cost
AP基小型可回收火箭
zsjzsj
2年2个月前
发表于喷气推进科创基金
The design and manufacture of a recyclable model rocket using AP-based fuel aims to introduce a low-cost
折叠式尾翼火箭的设计与制造
zsjzsj
1年4个月前
发表于喷气推进科创基金
The design and manufacture of the foldable tail wing rocket aim to achieve in-cylinder launch of the
225N 气氧-乙醇 电泵式再生冷却液体火箭发动机
The signal-price ratio of 200N class gas-oxygen-ethanol electric pump regenerative cooling liquid rocket
“腾格里之翼”I型探空火箭设计与制造构思
秦飒
1年6个月前
发表于喷气推进
Abstract: Design and manufacturing of the Type I Tengger Wing sounding rocket, along with all simulation
一种折叠式尾翼火箭的设计与应用研究
zsjzsj
9个月9天前
发表于喷气推进科创基金
The design and manufacture of the foldable tail wing rocket aim to achieve in-cylinder launch of the
模型火箭技术大全
大仙
18年3个月前
发表于喷气推进
双节模型火箭实验 國內資訊比賽消息 国内资讯比赛消息 火箭推進實驗室 火箭推进实验室 問與答问与答 常見問答 常见问答 原文地址:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXrocket
【讨论】业余固体火箭安全规范
拔刀斋
17年7个月前
回复于喷气推进
另外,含氯燃料燃烧能产生致癌的二恶英According to Russian and American specialists, solid rocket fuel burned at a temperature
除夕前夕发射的硝糖无控固体火箭发射报告及事故分析——空梦一号(KM-1)
星航天
3年9个月前
发表于喷气推进
KM-2 rocket accident report, parachute rope break, subsequent improvement.
【YL-1AG】曜灵1号甲改 41.25mm直径knsb火箭发动机设计
MagneticFlux
4年9个月前
发表于喷气推进
【方穹】一发41.25mm直径固体火箭发动机设计报告【 Square dome to the future】 Design report of a 41.25mm diameter solid rocket
航天局的日常/玉兔5火箭讨论
warmonkey
13年1个月前
回复于喷气推进
The "GoFast" Rocket Diameter:   10" OD = 25cm Length:   21 feet = 6.3m Liftoff weight:   724 lbs = 328kg
文件下载
加载中...
{{ errorInfo }}
{{ downloadWarning }}
你在 {{ downloadTime }} 下载过当前文件。
文件名称:{{ resource.defaultFile.name }}
下载次数:{{ resource.hits }}
所需积分:{{ costScores }},{{ holdScores }}下载当前附件免费{{ description }}
积分不足,去充值
文件已丢失

当前账号的附件下载数量限制如下:
时段 个数
{{f.startingTime}}点 - {{f.endTime}}点 {{f.fileCount}}